Problem-Led Selection
Start with what you notice in your water and what the water test shows.
ONE POD. COMPLETE WATER SOLUTION.
Different water problems need different treatment. WATERPOD helps you identify the issue and explore specialised pods that can be combined into a suitable water-treatment system.
Every water source is different. Understand the problem first, then explore the treatment stages that may be suitable.
Start with what you notice in your water and what the water test shows.
Explore specialised pods or combine treatment stages when testing indicates a multi-stage system is needed.
Consider water quality, required flow, daily consumption and operating conditions.
Request support with water testing, system selection, installation planning and maintenance.
Each WATERPOD category represents a treatment purpose. The right combination depends on water analysis and application.
Water softening for hardness-related concerns.
Explore PodFiltration of suitable suspended particles.
Explore PodA treatment stage for elevated turbidity.
Explore PodAn iron-removal treatment option selected by water chemistry.
Explore PodActivated carbon for selected taste, odour and chlorine concerns.
Explore PodReverse osmosis for suitable dissolved-salt treatment requirements.
Explore PodUltraviolet disinfection where validated and appropriate.
Explore PodA designed combination of treatment stages.
Explore PodEach application has different water-quality and operating requirements. Start with the application, then assess the water and required treatment.
Hardness, scale, sediment, odour and drinking-water quality concerns. Selection starts with water testing, required flow and daily use.
Explore applicationHigh and variable demand, guest comfort, housekeeping, equipment protection and application-specific water-quality controls.
Explore applicationHardness management, filtration and process-water requirements based on washing demand, fabric and process needs, and water analysis.
Explore applicationCentralised treatment for plumbing, heaters and equipment, considering peak flow, storage and maintenance access.
Explore applicationProcess-specific water-quality targets, continuous flow, pretreatment, monitoring, waste streams and operating costs.
Explore applicationWater quality designed to equipment manufacturer requirements and applicable standards. Softening alone may not be sufficient.
Explore applicationWATERPOD follows a problem-led approach. The final treatment selection requires water analysis and technical review.
Identify the water source, intended use and the concerns you have observed.
Review a suitable water analysis to understand the relevant water-quality parameters.
Identify suitable treatment stages. Different concerns may require different processes or multiple stages.
Confirm the final system design against water quality, application needs and operating conditions.
Water-treatment requirements vary by source, application, demand and target water quality. Explore the WATERPOD project approach and discuss the requirements of your site.
Explore ProjectsExplore practical topics from the WATERPOD knowledge brief, covering water quality, testing, filtration and treatment selection.
Answers to common questions about WATERPOD products and water-treatment selection.
No. Different contaminants need different treatment processes. A pod should be selected for a defined purpose, and multiple stages may be required after testing.
Start with your water source, observed symptoms and a laboratory water analysis. The problem finder can guide the first step, but final selection needs technical review.
A conventional sodium-cycle ion-exchange softener usually does not significantly reduce TDS. It exchanges calcium and magnesium for sodium.
No. A granular sand filter primarily removes suitable suspended particles. Dissolved salts generally require a different process, such as reverse osmosis where appropriate.
Often, but borewell water varies widely. Test parameters such as TDS, hardness, iron, manganese, turbidity, pH, alkalinity and any locally relevant contaminants before designing the system.
No. Appearance alone does not establish safety. Drinking-water quality needs appropriate chemical and microbiological testing and a treatment process designed for the results.
Share your water source, concerns and any available test report to begin exploring a suitable WATERPOD solution.
Start Your Water Assessment